程峰

職稱

副教授

職務

碩士生導師，專任教師

聯系方式

fcheng@jiangnan.edu.cn

教育背景

1999-2006：中北大學伟德国际1949始于英国學習，獲得學士和碩士學位

2006-2009：中北大學機電工程學院任教

2009-2014：東南大學伟德国际1949始于英国學習，獲得博士學位

2014至今：伟德国际1949始于英国任教

學術兼職

江蘇省“科技副總（企業創新崗）”特聘專家。

擔任《Tribology International》、《Journal   of Mechanical Science and Technology》、《iMeche Journal of Engineering   Tribology》、《Journal of Tribology》、《Applied   Science》、《Sensors》等國際期刊審稿人。

研究方向

1.   流體機械監測與空蝕防護

2.   機械/轉子監測及動力學分析

3.   工業數據監測系統與安全監管

（開展Creo、SolidWorks、ANSYS、Fluent、Python、Matlab、Adams等在産品設計及平台開發中的應用研究）

在研項目

1.   國家重點研發計劃子課題“基于IDS和GAIA-X的網絡協同制造跨國互操作規則和方案模式研究”（2022YFE0114300）

2.   裝備重大基礎研究項目中國艦船研究設計中心課題“噴丸及激光強化處理在空蝕防護中的應用研究”（909120903）

3.   長三角國創中心人才聯培項目“典型高危行業安全監管平台系統”（202232021000310）

4.   中國博士後科學基金項目“高速水潤滑主軸軸承的空化滑移與空蝕研究”（2018M630514）

5.   企業課題“動、靜設備大語言模型知識庫的建模、機理與驗證”

6.   企業課題“水電機組數據采集與在線監測系統的開發”  

2022,   面向旋轉機械設備的邊緣計算系統及大數據平台的關鍵技術研究及産業化，中國輕工業聯合會科技進步獎三等獎，排第二

1.           李富春, 程峰.   一種多環境适用的噴氣輔助型風力發電裝置, 2024.09.17, 中國，ZL   202311598683.0

2.           李富春, 程峰.   一種基于過濾的噴氣式反轉蝸輪汽輪發電裝置, 2024.09.17, 中國，ZL   202311774263.3

3.           程峰, 曾玉海等，采用可信邊緣通道的工業設備語義數據分級管理存儲方法，2024.07.02, 中國，ZL 202311822335.7

4.           Feng   Cheng,   Zhigang Ma, Weixi Ji. Die-Pressing Production Device and Method for Flavored Dried   Bean Curd. 2024.9.3, US 12075800 B2

5.           Feng   Cheng,   Weixi Ji, Kaiwen Zhou. Intelligent Car Garage-moving Device Based on   Single-chip Microcomputer Cintrol, 2020.04.07, US 10612260 B2

6.           程峰，宋飛虎，麻志剛，吉衛喜.一種彈性布料分型的茶幹快速成型裝置及其成型方法，2020.07.24，中國，ZL   201910762750.5

7.           程峰，吉衛喜，蔣紅琰.一種間隙可調的錐面水射流空蝕試驗裝置，2017.08.11，中國，ZL   201410820540.4

8.           程峰，武美萍，何雪明，呂彥明.一種回水槽冷卻的水潤滑可傾瓦靜壓軸承結構，2017.01.25，中國，ZL   201510017489.8

9.           程峰，蔣建忠，蔣紅琰.帶大推力盤的氣-液混合支撐高速電主軸裝置，2017.01.25，中國，ZL 201410822984.1

10.     程峰，蔣建忠，蔣紅琰.基于多孔結構的空氣撚接和退撚裝置，2017.07.11，中國，ZL   201410820176.1

11.     蔣書運，程峰.一種帶微弧氧化膜層的高速水軸承結構，2015.04.15，中國，ZL   201210235583.7

12.     蔣書運，程峰.一種帶氣體密封的高速水軸承性能試驗置，2015.02.18，中國，ZL   201210234963.9

13.     蔣書運，程峰. 高速水軸承智能供水裝置，2013.10.30，中國，ZL   201210234962.4

1.           魏春虎,程峰,曾玉海,等.一種适用于軸承故障診斷半監督學習分類的多層圖卷積注意力融合網絡.機電工程,2024,41(08):1364-1375.

2.           曾玉海,程峰,魏春虎,等.預測軸承壽命的gate遞歸單元特征融合域自适應模型.機電工程, 2024,41(04):613-621.

3.           Hongyan Jiang, Feng   Cheng, Cong Wu, et al. A multi-period-sequential-index   combination method for short-term prediction of small sample data. Reliability   Engineering and System Safety, 2024, 242:109767.

4.           Feng Cheng,   Fujia Wu, Shuo Wang, Xiaoxing Peng, Yantao Cao, Shifei Yang, A prediction   model for suction cavitation erosion in a journal bearing. Tribology   International, 2023, 184: 108424.

5.           趙克欽,程峰,楊世飛, 變轉速下對數平方包絡譜在滾動軸承故障診斷中的應用, 噪聲與振動控制,   2023, 43:132-138.

6.           唐亮,程峰,吉衛喜,等.改進ICA求解柔性作業車間插單重調度問題[J].計算機工程與應用,   2023,59(21):303-311.

7.           Shuo Wang, Feng   Cheng, Fujia Wu, et al. A study on   surface microgrooves in cavitation test of 6061 aluminum alloy. Proceedings   of the Institution of Mechanical Engineers, Part J: Journal of Engineering   Tribology, 2023, 237(5):1212-1223.

8.           Keqin Zhao, Feng   Cheng, Weixi Ji, Variable step   adaptive kurtogram method based on empirical wavelet transform for rolling   bearing fault diagnosis. Journal of Mechanical   Science and Technology, 2022, 36: 2695-2708.

9.           Feng Cheng,   Fujia Wu, Linlin Liu, Shifei Yang, Weixi Ji, Investigation on cavitation   erosion of diamond-like carbon films with heterogeneous multilayer structure.   Surface & Coatings Technology,   2021,405: 126682.

10.     Feng   Cheng, Weixi Ji, Junhua Zhao,   Bubble-bubble interaction effects on multiple bubbles dynamics in an   ultrasonic cavitation field, Proceedings of the Institution of   Mechanical Engineers Part J-Journal of Engineering Tribology, 2020,   7, 4386: 1051-1060.

11.     Feng   Cheng, Weixi Ji, Junhua Zhao,   Influence of adhesion strength on cavitation erosion resistance of   diamond-like carbon coating, Industrial Lubrication and   Tribology, 2019, 71: 724-730.

12.     Hongyan   Jiang, Feng Cheng,   Dianjun Fang, Influence of TiO₂ additives on cavitation erosion   resistance of Al-Mg alloy micro-arc oxidation coating, Coatings,   2019, 9, 521:   1-9.

13.     Hongyan   Jiang, Dianjun Fang, Klaus Spicher, Feng Cheng,   Boxing Li，A   new period-sequential index forecasting algorithm for time series data, Applied   Sciences, 2019, 9, 4386: 1-12.

14.     Feng Cheng，Weixi   Ji，Chenhao Qian，Jie   Xu，Cavitation bubbles dynamics and   cavitation erosion in water jet，Results in Physics，2018,   9: 1585-1593.

15.     Feng   Cheng, Weixi Ji, Numerical and   experimental study on dynamic characteristics of cavitation bubbles, Industrial Lubrication   and Tribology, 2018, 70: 1119-1126.

16.     Feng   Cheng, Weixi Ji, Identification   of dynamic coefficients of the journal bearing considering velocity slip of   cavitation zone in the rotating spindle unit. Proceedings of the   Institution of Mechanical Engineers Part J-Journal of Engineering Tribology,   2018,   232:   1304-1317.

17.     Feng Cheng，Weixi   Ji，Cavitation erosion of a single   bubble in water as a kind of dynamic damage，Proceedings   of the Institution of Mechanical Engineers Part J-Journal of Engineering   Tribology,   2017,  231: 1383-1389.

18.       Hongyan   Jiang, Feng Cheng，Experimental study on   isothermal forging technology for a complex-shaped titanium alloy wing，Rare Metal Materials and Engineering，2017，46:   3182-3187.

19.     Feng Cheng，Weixi   Ji，A velocity-slip model for   analysis of the fluid film in the cavitation region of a journal bearing，Tribology International，2016，97：163-172.  

20.     Feng Cheng，Weixi   Ji，Simultaneous identification of   bearing dynamic coefficients in a water-gas lubricated hydrostatic spindle   with a big thrust disc，Journal of Mechanical   Science and Technology, 2016, 30：4095-4107.

21.     Feng Cheng，Weixi   Ji，A new model of water gas   turbulent lubrication for analysis of the static and dynamic characteristics   in a journal bearing，Proceedings of the   Institution of Mechanical Engineers Part J-Journal of Engineering Tribology,   2016, 230: 1439-1451.

22.     Xiaohui Lin，Shuyun   Jiang，Chengyu Hua，Feng   Cheng，Thermohydrodynamic coupling model   of oil aeration turbulent lubrication for journal bearing with interface   effect，Journal of Tribology-Transactions   of the ASME，2015, 137：041705-1~   041705-11.

23.     Feng Cheng，Shuyun   Jiang，Cavitation erosion resistance of   diamond-like carbon coating on stainless steel，Applied   Surface Science，2014，292：16-26.

24.     Feng Cheng，Shuyun   Jiang，Jun Liang，Cavitation   erosion resistance of microarc oxidation coating on aluminium alloy，Applied Surface Science，2013，280：287-296.